Roof Ceiling 1100 Aluminum Coil PE PVDF Coated Corrosion Resistance

1100 Aluminum Coil

Product Description:

Features:

Common Tempers (States)

The temper designation indicates the level of hardness and strength achieved through mechanical processing.

Temper    Description    Key Characteristics
O    Soft / Annealed    Maximum ductility, lowest strength, excellent for deep drawing and complex forming
H12    1/4 Hard    Strain-hardened to a quarter-hard level. Balanced formability and strength
H14    Half Hard (Most Common)    Strain-hardened to a half-hard level. Popular for general sheet metal work, offering enhanced rigidity
H16    3/4 Hard    Strain-hardened to a three-quarter-hard level. Higher strength, reduced formability
H18    Full Hard    Strain-hardened to maximum strength, minimum ductility
H22, H24, H26    Strain-hardened & partially annealed    Intermediate tempers offering specific balances between strength and formability
Note: As the degree of work hardening increases (from O to H18), strength increases while formability decreases.

Thickness Range

1100 aluminum coil is available in a wide range of thicknesses to suit various applications.

Standard Range: 0.1 mm – 12.0 mm (0.004" – 0.472")

Ultra-Thin Gauge (Foil): Can be as low as 0.014 mm – 0.4 mm

Heavy Gauge: Up to 350 mm (for specific industrial applications, more common in plate form)

Common Coil Range: 0.2 mm – 3.0 mm for most coil applications

Note: Mechanical properties like tensile strength and elongation can vary slightly depending on the specific thickness within a temper.

Width Range

The width of 1100 aluminum coils is highly customizable depending on the supplier's slitting capabilities.

Common Width Range: 10 mm – 2650 mm (approx. 0.4" – 104")

Standard Stock Widths: Common stock widths include 1000 mm, 1219 mm (48"), 1250 mm, and 1524 mm (60")

Slitting Capabilities: Coils can be slit to specific widths for custom requirements

Inner Diameter: Typically 508 mm (standard)

Common Applications

Thanks to its high purity, excellent corrosion resistance, and superior formability, 1100 aluminum coil is used across a vast range of industries.

Food & Chemical Industry
Cooking utensils, pots, pans, and lids

Food and chemical handling equipment

Storage tanks and processing equipment

Bottle caps and closures

Foil and food packaging containers

Electrical & Electronics
Heat sinks and thermal management components

Capacitor shells and components

Transformer winding strips

Bus bars and electrical conductors

Lamp reflectors and lighting fixtures

Building & Construction
Building facades and architectural panels

Curtain wall decoration

Signage, nameplates, and traffic signs

Ceiling panels and decorative trim

Industrial & Manufacturing
Sheet metal work and general fabrication

Spun hollowware and deep-drawn stampings

Fin stock for heat exchangers

Chemical equipment and tank linings

Specialized Applications
CTP/PS plate base for printing industry

Reflective surfaces and mirror finishes

HVAC components and insulation jacketing

Technical Parameters:

About Us

LANGFANG RONGDA METAL PRODUCTS CO., LTD. is located in Xinzhen, Wen'an, which is known as the "Hometown of Keels" in Langfang City, Hebei Province, China. It was founded in 1992, products include bright aluminum and color coated aluminum. The sales footprint spans the globe. The annual production of color coated aluminum coils exceeds 50,000 tons. Our company covers an area of 30,000 square meters and has 130 employees. We have 3 production lines integrating cleaning, drying, roll coating, and slitting. The daily shipment volume is 200 tons, and the annual sales amount reaches 1.3 billion yuan.

FAQ: